410 Stainless Steel Bar
Source£ºhttp://www.zytcsteel.com Time£º2018/8/10 15:56:47 View£º
Brief Introduction Of 410 stainless steel :
410 (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of mechanical properties. The alloy has good corrosion resistance along with high strength and hardness. In the annealed condition, 410 stainless steel plate is ductile and may be formed. It remains magnetic in both the annealed and heat treated conditions.
410 stainless steel plate is resistant to atmospheric conditions, water and some chemicals. It can be used in environments containing weak or diluted acetic acid, naptha, nitric acid and sulfuric acid. The alloy is also resistant to acids contained in foods.
410 stainless steel plate can also be used in slightly chlorinated and desaereted water. It performs well in oil and gas applications where desaereted and low hydrogen sulfide exist. However, the alloy is prone to chloride attack, particularly in oxidizing conditions.
410 stainless steel plate operates well in environments requiring moderate corrosion resistance and high mechanical properties.
410 stainless steel plate resists oxidation up to 1292¡ãF (700¡ãC) continuously, and up to 1500¡ãF (816¡ãC) on an intermittent basis.
Heat Treatment:
Annealing - Heat slowly to 1500 - 1650¡ãF (816 - 899¡ãC), cool to 1100oF (593¡ãC) in furnace, air cool
Process Annealing - Heat to 1350 - 1450¡ãF (732 - 788¡ãC), air cool
Hardening - Heat to 1700 - 1850¡ãF (927 - 1010¡ãC), air cool or oil quench. Follow by stress-relief or temper
Stress Relieving - Heat to 300 - 800¡ãF (149 - 427¡ãC) for 1 to 2 hours, air cool
Tempering - Heat to 1100 - 1400¡ãF (593 - 760¡ãC) for 1 to 4 hours, air cool
Product Attributes:
Technique: Hot Rolled/ Cold Drawn / Forged
Surface: Bright / Black/ Pickling /Polished
Diameter: 4mm-720mm(Stright), 2mm to 20mm (Wire Rod)
Length: As requirement , but normally 6 meters
Diameter Tolerance: H9, H11, H13, K9, K11, K13 etc
Delivery time: within 15 working days
Payment: T/T,L/C
410 (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of mechanical properties. The alloy has good corrosion resistance along with high strength and hardness. In the annealed condition, 410 stainless steel plate is ductile and may be formed. It remains magnetic in both the annealed and heat treated conditions.
410 stainless steel plate is resistant to atmospheric conditions, water and some chemicals. It can be used in environments containing weak or diluted acetic acid, naptha, nitric acid and sulfuric acid. The alloy is also resistant to acids contained in foods.
410 stainless steel plate can also be used in slightly chlorinated and desaereted water. It performs well in oil and gas applications where desaereted and low hydrogen sulfide exist. However, the alloy is prone to chloride attack, particularly in oxidizing conditions.
410 stainless steel plate operates well in environments requiring moderate corrosion resistance and high mechanical properties.
410 stainless steel plate resists oxidation up to 1292¡ãF (700¡ãC) continuously, and up to 1500¡ãF (816¡ãC) on an intermittent basis.
Heat Treatment:
Annealing - Heat slowly to 1500 - 1650¡ãF (816 - 899¡ãC), cool to 1100oF (593¡ãC) in furnace, air cool
Process Annealing - Heat to 1350 - 1450¡ãF (732 - 788¡ãC), air cool
Hardening - Heat to 1700 - 1850¡ãF (927 - 1010¡ãC), air cool or oil quench. Follow by stress-relief or temper
Stress Relieving - Heat to 300 - 800¡ãF (149 - 427¡ãC) for 1 to 2 hours, air cool
Tempering - Heat to 1100 - 1400¡ãF (593 - 760¡ãC) for 1 to 4 hours, air cool
Product Attributes:
Technique: Hot Rolled/ Cold Drawn / Forged
Surface: Bright / Black/ Pickling /Polished
Diameter: 4mm-720mm(Stright), 2mm to 20mm (Wire Rod)
Length: As requirement , but normally 6 meters
Diameter Tolerance: H9, H11, H13, K9, K11, K13 etc
Delivery time: within 15 working days
Payment: T/T,L/C