1050 Aluminum Round Bar

Brief Introduction Of 1050 aluminum:
 1050 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. 1050 alloy is also sometimes used for the manufacture of heat sinks, since it has a higher thermal conductivity than other alloys. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.
Welding:
 When welding Aluminium alloy 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7XXX series, the recommended wire is 5356. For other alloys use 4043 filler wire.
 The most common temper for 1050 aluminium is:
 H14 - work hardened by rolling to half hard, not annealed after rolling
Applications of Aluminium Alloy 1050:
*Chemical process plant equipment
*Food industry containers
*Pyrotechnic powder
*Architectural flashings
*Lamp reflectors
*Cable sheathing,vessels,and appliances
*Chemical and pharmaceutical industries
*Architecture and paneling
Product Attributes:
*Available shapes: Flats, squares and rounds,wire
*Diameter: φ2mm-φ600mm
*Length: As requirement,but normally 3 meters
*Technical:Cold Drawn/Extruded/Forged
*Temper: O/T4/T5/T6/T651/T351/T73/T7351
*Surface: Mill Finish/Anodized.
*Mill Certificate: EN10204/3.1
*Standard: Specifications: ASTM B211, AMS 4122, AMS 4123, AMS 4124, AMS4186, AMS-QQ-A-225/9, ASTM B221, AMS 4154, AMS 4166, AMS 4167, AMS-QQ-A-200/11
*Payment: T/C,L/C
*Package: Standard export sea worthy package
*Delivery time: Normally 15 working days