5454 Aluminum Sheet
Source：http://www.zytcsteel.com Time：2018/8/11 9:39:19 View：
Brief Introduction Of 5454 aluminum :
Alloy 5454 aluminum has very good corrosion resistance, in particular to seawater and general environmental conditions. Strength is medium to high and similar alloy 5754 with good strength in the temperature range 65 to 170 degrees centigrade. It has a high fatigue strength. It is not suitable for complex or fine extrusions.
Application :
* Road Transport Body-Building
* Cemical and Process Plant
* Pressure Vessels, Containers, Boilers
* Cryogenics
* Marine & Off-shore incl. Masts,
* Pylons, poles & masts
TEMPER TYPES
The most common tempers for Alloy 5454 aluminum are shown below
• O - Soft
H111 - Some work hardening imparted by shaping processes but less than required for H11 temper
H22 - Work hardened by rolling then annealed to quarter hard
H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard
Product Attributes:
*Temper: O/H111/H112/H12/H14/H16/H18/H22/H24/H26 etc.
*Thickness: 0.5mm-600mmmm
*Width: 100mm-3800mm
*Length: As requirement
*Surface: Mill Finish, Oxidized,Mirror Finish,Sliver,Black, etc.
*Mill Certificate: EN10204/3.1
*Payment: T/C, L/C
*Package: Wooden Package, less than 2 tons per cases
*Delivery time: Normally 15 working days
Alloy 5454 aluminum has very good corrosion resistance, in particular to seawater and general environmental conditions. Strength is medium to high and similar alloy 5754 with good strength in the temperature range 65 to 170 degrees centigrade. It has a high fatigue strength. It is not suitable for complex or fine extrusions.
Application :
* Road Transport Body-Building
* Cemical and Process Plant
* Pressure Vessels, Containers, Boilers
* Cryogenics
* Marine & Off-shore incl. Masts,
* Pylons, poles & masts
TEMPER TYPES
The most common tempers for Alloy 5454 aluminum are shown below
• O - Soft
H111 - Some work hardening imparted by shaping processes but less than required for H11 temper
H22 - Work hardened by rolling then annealed to quarter hard
H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard
Product Attributes:
*Temper: O/H111/H112/H12/H14/H16/H18/H22/H24/H26 etc.
*Thickness: 0.5mm-600mmmm
*Width: 100mm-3800mm
*Length: As requirement
*Surface: Mill Finish, Oxidized,Mirror Finish,Sliver,Black, etc.
*Mill Certificate: EN10204/3.1
*Payment: T/C, L/C
*Package: Wooden Package, less than 2 tons per cases
*Delivery time: Normally 15 working days