Monel R405
Description:
Monel R405 (UNS N04405 / W.Nr. 2.4360, 2.4361 the free-machining version of Monel 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. A Ni-Cu alloy with high strength and excellent resistance to a range of media including seawater, hydrofluoric and sulfuric acids, and alkalies. Used in marine and offshore engineering, chemical andhydrocarbon processing equipement, valves, pumps, shafts, fittings, fasteners, and heat exchangers.
Monel R405 Features:
Resistant to seawater and steam at high temperatures
Excellent resistance to rapidly flowing brackish water or seawater
Excellent resistance to stress corrosion cracking in most freshwaters
Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
Excellent resistance to neutral and alkaline salt
Resistance to chloride induced stress corrosion cracking
Good mechanical properties from sub-zero temperatures up to 1020° F
High resistance to alkalis
Monel R405 Applications:
Marine engineering
Chemical and hydrocarbon processing equipment
Gasoline and freshwater tanks
Crude petroleum stills
De-aerating heaters
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings, and fasteners
Industrial heat exchangers
Chlorinated solvents
Crude oil distillation towers
Monel R405 Specifications:
Trademark |
GB |
GOST |
ASTM |
UNS |
DIN |
W.Nr. |
NF |
BS |
Monel R-405 |
MCu-28-1.5-1.8 |
НМЖМц28-2.5-1.5 |
Monel R-405 |
N04405 |
NiCu30Fe |
2.4360 2.4361 |
Nu30 |
Ni68Cu28Fe NA12 |
Chemical Compositions of Monel R-405 Nickel Alloy
Alloy |
C |
Si |
Mn |
P |
S |
Ni |
Cu |
Fe |
Monel R-405 |
≤0.30 |
≤0.50 |
≤2.00 |
≤0.030 |
0.025-0.060 |
≥63.0 |
28.0-34.0 |
≤2.50 |
Typical Physical and Mechanical Properties (RT, Annealed+Aged)
Density, g/cm3 |
Melting Point, ℃ |
Tensile Strength, MPa |
Yield Strength, MPa |
ELongation, % |
Hardness, HRB |
8.5 |
1315-1350 |
1100 |
790 |
20 |
/ |
Monel R405 Product Forms and Standards:
Rod, Bar, Wire and Forgings |
ASTM B865, ASME SB865, DIN 17752, DIN 17753, DIN 17754 |
Plate, Sheet and Strip |
DIN 17750 |
Pipe and Tube |
DIN 17751 |
Welding Product |
– |
Others |
ASTM B366, ASME SB366, DIN 17743 |